Battery Making Machine Pouch Cell Edge Sealing Machine
Model: MR-SFZ200
1. MR-SFZ200 Battery Heat Sealing Machine is a compact heating
sealer for sealing aluminum-laminated films during pouch cell
(polymer Li-Ion cell) case preparation.
2. The battery heat sealing machine adopts soft sealing bar, The
sealing is copper in bottom and aluminum and Silicone rubber piece
on top. So it can be used for both top and side sealing for pouch
cell.
3. It can prepare the pouch cell for the injection of electrolyte
by sealing the side and top of the pouch cell with tab.
Features:
1. Unique safety protection and anti-scalding design, the
temperature of the upper and lower irons can be adjusted through
the button on the thermostat panel.
2. The head is made of copper material, which has good heat
transfer effect, saves electricity consumption, improves work
efficiency, and saves energy compared with similar products.
3. The pressure of the upper and lower heads can be adjusted by the
pressure regulating valve to meet the requirements of different
process parameters.
4. The upper and lower heads are driven by cylinders and guided by
two linear guide sleeves, which can move up and down flexibly and
accurately to ensure the parallelism requirements of the product
after edge sealing.
5. It can be applied to the product batteries of different
specifications, and the adjustment is simple and convenient,
without adjustment and replacement of the seal head.
6. The frame is made of aluminum profile, which has a beautiful
appearance; the sheet metal adopts three-dimensional geometric
design, which is simple and beautiful.
7. Small size, smooth and even seal marks, beautiful appearance of
the edge seal; soft package heat sealing machine equipment.
Specification
| Model | Pouch Cell Edge Sealing Machine MR-SFZ200 |
| Maximum seal length | 200 mm Max. (200mm~400mm can be customized) |
| Sealing Width | 5mm±0.4 (3～10mm can be customized) |
| Side sealing thickness | 60 - 300um (depending on the thickness of the aluminum film) |
| Thickness of top tab edge sealing | 200 - 700um (depending on the thickness of the aluminum film) |
| Heat sealing temperature | RT～250℃ adjustable |
| Temperature accuracy | ±2℃ |
| Sealing time | 0-99s adjustable |
| Seal thickness accuracy (mm) | The thickness difference between any two points is less than 15um |
| Safety device | Equipped with protective device to prevent high temperature scald. |
| Operation mode | The equipment has the function of automatic and manual operation. |
| Flexibility | The equipment is easy to clean and replace the copper mold. |
| compressed air | 5～8kg/cm2 |
| Working speed of air compressor | ≥400 times/hour |
| Power Supply | AC220V/110V, 50/60Hz |
| Power | 0.5KW |
| Dimensions | L430x W330x H480mm |
| Equipment weight | 35Kg |
| Application Notes | Suggested Sealing Parameter: 1. Upper Heating Blade Temperature: 200°C 2. Lower Heating Blade Temperature: 180°C 3. Pressure: 40 psi 4. Duration: 3 seconds Please wait until both dies reached the Setting temperature and
controller disable the Low temp. ALM, then begin to operate. |
| Notes | For completing the full sealing procedure, you may need the
following combination: - Compact Heating Sealer (suitable for top & side sealing with tab)
- Vacuum Sealing Machine (for pre-sealing in glove box after
injection of electrolyte)
C. Final Vacuum Sealing Machine (for vacuuming and second sealing with automatic puncture and
degassing function) 
If you don't want to spend too much budget on the sealing part, machine A plus B can also meet your basic sealing need
|
Our Advantages
1. Steady and high quality ! -cause we are a manufacturer of
Lithium Battery Equipment, and we only focus on one thing that is
make professional Lithium ion Battery Equipment for customer around
the world.
2. Friendly use! all MRBEST Battery Equipment with teach manual and
support live teaching via media.
3. Reliable factory! My factory located in Shenzhen city of China,
support factory visit and video factory visit .
4. 1 year warranty plus lifetime technical support.
5.All the parts use on machine, in stock forever.
6. Powerful technical support, NOT TRADE COMPANY! We are
professional on Lithium Battery Equipment, the chief engineer team
have
more than 20 years experience on lithium battery area, so we can
easy do diagnose on machine if customer have question.
7. 100% PATIENCE to all customers! Our patience not only before
consult order, also after-sale service, one by one .
